It is currently Sat Aug 19, 2017 1:17 pm



Welcome
Welcome to antiX-forum.

You are currently viewing our boards as a guest, which gives you limited access to view most discussions and access our other features. By joining our free community, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content, and access many other special features. Registration is fast, simple, and absolutely free, so please, join our community today!


Post new topic Reply to topic  [ 160 posts ]  Go to page Previous  1 ... 7, 8, 9, 10, 11
Author Message
 Post subject: Re: What specs are you running antiX on?
PostPosted: Sat Oct 22, 2016 6:26 pm 
Offline
User avatar

Joined: Wed May 11, 2016 3:25 pm
Posts: 125
Hey All,

I acquired a nifty little home build "Enpower Fuzion 4" I have never heard of them.
After a serious dusting with compressed air I had to replace 1 case fan and 1 processor fan (both 80mm) and while I was so close I pulled the processor heat sink and reapplied some new thermal paste.
Installed antix 16 / 32bit and this thing flies. :)

Code:
$ inxi -Fxz
System:    Host: antix1 Kernel: 4.4.10-antix.1-486-smp i686 (32 bit gcc: 4.9.3) Desktop: IceWM 1.3.8
           Distro: antiX-16_386-full Berta Cáceres 26 June 2016
Machine:   Mobo: Gigabyte model: GA-K8VM800M (rev 2.x)  Bios: Award v: FD date: 12/07/2005
CPU:       Single core AMD Sempron 2800+ (-UP-) cache: 256 KB
           flags: (lm nx pae sse sse2 sse3) bmips: 3214 speed: 1607 MHz (max)
Graphics:  Card: Advanced Micro Devices [AMD/ATI] RV280 [Radeon 9200 PRO] bus-ID: 01:00.0
           Display Server: X.Org 1.16.4 drivers: ati,radeon (unloaded: fbdev,vesa)
           Resolution: [email protected]
           GLX Renderer: Mesa DRI R200 (RV280 5960) x86/MMX+/3DNow!+/SSE2 DRI2
           GLX Version: 1.3 Mesa 10.3.2 Direct Rendering: Yes
Audio:     Card VIA VT8233/A/8235/8237 AC97 Audio Controller driver: snd_via82xx port: e000 bus-ID: 00:11.5
           Sound: Advanced Linux Sound Architecture v: k4.4.10-antix.1-486-smp
Network:   Card-1: ADMtek NC100 Network Everywhere Fast Ethernet 10/100
           driver: tulip v: 1.1.15-NAPI port: b000 bus-ID: 00:0a.0
           IF: eth0 state: unknown speed: N/A duplex: N/A mac: <filter>
           Card-2: VIA VT6102 [Rhine-II] driver: via-rhine port: e400 bus-ID: 00:12.0
           IF: eth1 state: down mac: <filter>
Drives:    HDD Total Size: 120.0GB (4.7% used) ID-1: /dev/sda model: MAXTOR_STM312081 size: 120.0GB
Partition: ID-1: / size: 108G used: 3.3G (4%) fs: ext4 dev: /dev/sda1
           ID-2: swap-1 size: 2.18GB used: 0.00GB (0%) fs: swap dev: /dev/sda2
Sensors:   System Temperatures: cpu: 32.0C mobo: N/A
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 147 Uptime: 1:50 Memory: 221.0/2017.5MB Init: SysVinit runlevel: 5 Gcc sys: 4.9.2
           Client: Shell (bash 4.3.301) inxi: 2.3.0

_________________
I'm grumpy because I can be not because I'm old.

The world is what you make of it, if it doesn't fit, you make alterations.

Linux The Smart Choice For Smart People. Windows For Everyone Else.


Top
 Profile  
 
 Post subject: Re: What specs are you running antiX on?
PostPosted: Sat Oct 22, 2016 7:56 pm 
Offline

Joined: Fri Feb 27, 2009 10:17 am
Posts: 585
I got permission from the PC/Network guys at work to use my work laptop off hours running linux with the understanding that I wouldn't mess with the stuff on the hard drive. Its a Dell Latitude E5540 with 8 gb of memory, and I'm running AntiX 16 386 Full live with persistence from the same USB flash drive that I use it with in my Dell Latitude D620 laptop, and my HP DV9000 laptops, all of which run quite well with it.

_________________
Too many computers, in use now:
1-Dell D620 2gb
2-HP DV9917 4gb
3-Dell E5540 8gb
4-Dell Inspiron 15 7559 16gb
various older machines


Top
 Profile  
 
 Post subject: Re: What specs are you running antiX on?
PostPosted: Thu Oct 27, 2016 4:50 pm 
Offline
User avatar

Joined: Thu Jul 26, 2012 9:46 pm
Posts: 792
Location: Surrey/Hants Border UK
Presently running on this, (1GB ram).
Code:
$ inxi -Fxz
System:    Host: antix16-32bit Kernel: 4.4.10-antix.1-486-smp i686 (32 bit gcc: 4.9.3)
           Desktop: Fluxbox 1.3.5
           Distro: antiX-16_386-full Berta Cáceres 26 June 2016
Machine:   Mobo: Foxconn model: D270S/D250S v: MP
           Bios: American Megatrends v: B35F1P06 date: 05/07/2012
CPU:       Dual core Intel Atom D2500 (-MCP-) cache: 512 KB
           flags: (nx pae sse sse2 sse3 ssse3) bmips: 7447
           clock speeds: max: 1861 MHz 1: 1861 MHz 2: 1861 MHz
Graphics:  Card: Intel Atom Processor D2xxx/N2xxx Integrated Graphics Controller
           bus-ID: 00:02.0
           Display Server: X.Org 1.16.4 drivers: (unloaded: fbdev,vesa)
           Resolution: [email protected], [email protected]
           GLX Renderer: Gallium 0.4 on llvmpipe (LLVM 3.5, 128 bits)
           GLX Version: 3.0 Mesa 10.3.2 Direct Rendering: Yes
Audio:     Card Intel NM10/ICH7 Family High Definition Audio Controller
           driver: snd_hda_intel bus-ID: 00:1b.0
           Sound: ALSA v: k4.4.10-antix.1-486-smp
Network:   Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
           driver: r8169 v: 2.3LK-NAPI port: e000 bus-ID: 02:00.0
           IF: eth0 state: down mac: <filter>
           Card-2: Qualcomm Atheros AR9227 Wireless Network Adapter
           driver: ath9k bus-ID: 03:00.0
           IF: wlan0 state: up mac: <filter>
Drives:    HDD Total Size: 160.0GB (22.2% used)
           ID-1: /dev/sda model: Hitachi_HTS54501 size: 160.0GB
Partition: ID-1: / size: 4.5G used: 2.6G (60%) fs: ext4 dev: /dev/sda1
           ID-2: /home size: 141G used: 31G (23%) fs: ext4 dev: /dev/sda3
Sensors:   System Temperatures: cpu: 52.0C mobo: 26.8C
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 122 Uptime: 56 min Memory: 430.7/987.8MB
           Init: SysVinit runlevel: 5 Gcc sys: 4.9.2
           Client: Shell (bash 4.3.301) inxi: 2.3.0

_________________
Linux (& BSD) since 1999.


Top
 Profile  
 
 Post subject: Re: What specs are you running antiX on?
PostPosted: Thu Oct 27, 2016 11:18 pm 
Offline

Joined: Wed Oct 26, 2016 11:15 am
Posts: 48
Location: Hollywood, FL, USA
This isn't old but it is low-spec. AntiX-16 base runs fine on it.


Code:
System:    Host: mini Kernel: 4.4.10-antix.1-amd64-smp x86_64 (64 bit)
           Desktop: JWM sn-579
           Distro: antiX-16_x64-base Berta Cáceres 26 June 2016
Machine:   System: Intel (portable) product: STCK1A8LFC v: H79550-100
           Mobo: Intel model: STCK1A8LFC v: H67494-302
           Bios: Intel v: FCBYT10H.86A.0031.2015.1027.1417 date: 10/27/2015
CPU:       Quad core Intel Atom Z3735F (-MCP-) cache: 1024 KB
           clock speeds: max: 1832 MHz 1: 1142 MHz 2: 1410 MHz 3: 1580 MHz
           4: 1582 MHz
Graphics:  Card: Intel Atom Processor Z36xxx/Z37xxx Series Graphics & Display
           Display Server: X.Org 1.16.4 driver: intel
           Resolution: [email protected]
           GLX Renderer: Mesa DRI Intel Bay Trail GLX Version: 3.0 Mesa 10.3.2
Audio:     Card-1 ATR2USB driver: USB-Audio
           Card-2 C-Media driver: USB Audio
           Sound: ALSA v: k4.4.10-antix.1-amd64-smp
Network:   Card: Ralink RT5572 Wireless Adapter
           IF: N/A state: N/A mac: N/A
Drives:    HDD Total Size: NA (-) ID-1: /dev/mmcblk0 model: N/A size: 7.7GB
           ID-2: /dev/mmcblk1 model: N/A size: 64.0GB
Partition: ID-1: / size: 5.5G used: 2.8G (54%) fs: ext4 dev: /dev/mmcblk0p2
           ID-2: swap-1 size: 0.98GB used: 0.04GB (4%) fs: swap dev: /dev/mmcblk0p3
Sensors:   System Temperatures: cpu: 58.0C mobo: N/A
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 177 Uptime: 4:19 Memory: 324.5/907.6MB
           Client: Shell (bash) inxi: 2.3.0

_________________
Intel Compute Stick with Atom z3735f 1.3 GHz, 1 GB Ram, AntiX 16 64 bit


Top
 Profile  
 
 Post subject: Re: What specs are you running antiX on?
PostPosted: Mon Dec 26, 2016 3:01 pm 
Offline
User avatar

Joined: Sat Nov 07, 2015 9:02 pm
Posts: 32
Code:
$ inxi -F
System:    Host: antix1 Kernel: 4.4.10-antix.1-486-smp i686 (32 bit)
           Desktop: Fluxbox 1.3.5
           Distro: antiX-16_386-full Berta Cáceres 26 June 2016
Machine:   System: Hewlett-Packard product: HP Compaq dc7100 SFF(PC922A)
           Mobo: Hewlett-Packard model: 097Ch
           Bios: Hewlett-Packard v: 786C1 v02.15 date: 08/07/2008
CPU:       Single core Intel Pentium 4 (-HT-) cache: 1024 KB
           clock speeds: max: 2994 MHz 1: 2994 MHz 2: 2994 MHz
Graphics:  Card: Intel 82915G/GV/910GL Integrated Graphics Controller
           Display Server: X.Org 1.16.4 drivers: intel (unloaded: fbdev,vesa)
           Resolution: [email protected]
           GLX Renderer: Mesa DRI Intel 915G x86/MMX/SSE2
           GLX Version: 2.1 Mesa 10.3.2
Audio:     Card Intel 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller
           driver: snd_intel8x0
           Sound: ALSA v: k4.4.10-antix.1-486-smp
Network:   Card: Broadcom NetXtreme BCM5751 Gigabit Ethernet PCI Express
           driver: tg3
           IF: eth0 state: up speed: 100 Mbps duplex: full
           mac: 00:12:79:d9:a2:61
Drives:    HDD Total Size: 690.9GB (1.7% used)
           ID-1: /dev/sda model: Hitachi_HDT72101 size: 160.0GB
           ID-2: USB /dev/sdc model: USB_DISK_2.0 size: 31.0GB
           ID-3: USB /dev/sdb model: Backup_Drive size: 499.9GB
Partition: ID-1: / size: 1.1G used: 523M (51%) fs: overlay dev: N/A
           ID-2: swap-1 size: 2.17GB used: 0.01GB (0%) fs: swap dev: /dev/sda2
Sensors:   None detected - is lm-sensors installed and configured?
Info:      Processes: 132 Uptime: 21:05 Memory: 163.9/2009.4MB
           Client: Shell (bash) inxi: 2.3.0


Top
 Profile  
 
 Post subject: Re: What specs are you running antiX on?
PostPosted: Sun Jan 15, 2017 2:05 am 
Offline

Joined: Sat Jan 07, 2017 11:34 pm
Posts: 1
greetings

running IBM Thinkpad T22 900 Mhz processor P III 55 gig hardrive 512 meg ram :wink:


Top
 Profile  
 
 Post subject: Re: What specs are you running antiX on?
PostPosted: Fri Feb 10, 2017 3:00 pm 
Offline
User avatar

Joined: Sat Nov 07, 2015 9:02 pm
Posts: 32
Code:
System:    Host: antix1 Kernel: 4.4.10-antix.1-amd64-smp x86_64 (64 bit)
           Desktop: Fluxbox 1.3.5
           Distro: antiX-16_x64-full Berta Cáceres 26 June 2016
Machine:   Device: desktop System: Hewlett-Packard product: HP Compaq 6005 Pro MT PC
           Mobo: Hewlett-Packard model: 3047h
           BIOS: Hewlett-Packard v: 786G6 v01.03 date: 08/25/2009
CPU:       Dual core AMD Phenom II X2 B55 (-MCP-) cache: 1024 KB
           clock speeds: max: 3000 MHz 1: 2300 MHz
           2: 1500 MHz
Graphics:  Card: Advanced Micro Devices [AMD/ATI] RS880 [Radeon HD 4200]
           Display Server: X.Org 1.16.4 drivers: ati,radeon (unloaded: modesetting,fbdev,vesa)
           Resolution: [email protected]
           GLX Renderer: Gallium 0.4 on AMD RS880
           GLX Version: 3.0 Mesa 10.3.2
Audio:     Card Advanced Micro Devices [AMD/ATI] SBx00 Azalia (Intel HDA)
           driver: snd_hda_intel
           Sound: ALSA v: k4.4.10-antix.1-amd64-smp
Network:   Card: Broadcom NetXtreme BCM5761 Gigabit Ethernet PCIe
           driver: tg3
           IF: eth0 state: up speed: 1000 Mbps duplex: full
           mac: 78:e7:d1:81:1c:6f
Drives:    HDD Total Size: 499.9GB (11.8% used)
           ID-1: USB /dev/sda model: Backup_Drive size: 499.9GB
           
           ID-1: / size: 12G used: 1.2G (11%) fs: overlay dev: N/A
Sensors:   System Temperatures: cpu: 26.0C mobo: N/A
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 160 Uptime: 19:35 Memory: 500.3/15547.0MB
           Client: Shell (bash) inxi: 2.3.5


Top
 Profile  
 
 Post subject: Re: What specs are you running antiX on?
PostPosted: Fri Feb 17, 2017 12:49 am 
Offline
User avatar

Joined: Wed May 11, 2016 3:25 pm
Posts: 125
Another Rescue. 8)

Code:
inxi -F
Dell-Precision-380:~$
System:    Host: Dell-Precision-380 Kernel: 4.4.10-antix.1-486-smp i686 (32 bit) Desktop: IceWM 1.3.8
           Distro: antiX-16_386-full Berta Cáceres 26 June 2016
Machine:   Device: desktop System: Dell product: Precision WorkStation 380
           Mobo: Dell model: 0CJ774 BIOS: Dell v: A07 date: 04/18/2006
CPU:       Dual core Intel Pentium D (-MCP-) cache: 1024 KB
           clock speeds: max: 2793 MHz 1: 2793 MHz 2: 2793 MHz
Graphics:  Card: NVIDIA NV44 [Quadro NVS 285]
           Display Server: X.Org 1.16.4 drivers: nouveau (unloaded: modesetting,fbdev,vesa)
           Resolution: [email protected]
           GLX Renderer: Gallium 0.4 on NV44 GLX Version: 2.1 Mesa 10.3.2
Audio:     Card-1 Intel NM10/ICH7 Family High Definition Audio Controller driver: snd_hda_intel
           Card-2 Creative Labs SB X-Fi driver: snd_ctxfi
           Sound: Advanced Linux Sound Architecture v: k4.4.10-antix.1-486-smp
Network:   Card: Broadcom NetXtreme BCM5751 Gigabit Ethernet PCI Express driver: tg3
           IF: eth0 state: up speed: 100 Mbps duplex: full mac: 00:13:72:1e:3e:45
Drives:    HDD Total Size: 120.0GB (4.5% used)
           ID-1: /dev/sda model: ST3120022A size: 120.0GB
Partition: ID-1: / size: 108G used: 3.2G (4%) fs: ext4 dev: /dev/sda1
           ID-2: swap-1 size: 2.17GB used: 0.00GB (0%) fs: swap dev: /dev/sda2
Sensors:   System Temperatures: cpu: No active sensors found. Have you configured your sensors yet? mobo: N/A
Info:      Processes: 145 Uptime: 9:08 Memory: 442.6/3029.9MB Client: Shell (bash) inxi: 2.3.8

_________________
I'm grumpy because I can be not because I'm old.

The world is what you make of it, if it doesn't fit, you make alterations.

Linux The Smart Choice For Smart People. Windows For Everyone Else.


Top
 Profile  
 
 Post subject: Re: What specs are you running antiX on?
PostPosted: Fri Mar 24, 2017 4:13 am 
Offline

Joined: Sun Jan 08, 2017 4:05 am
Posts: 28
I went the other way with a brand new AMD FX and Radeon card:

Code:
$ inxi -Fxz
System:    Host: Kernel: 4.4.10-antix.1-amd64-smp x86_64 (64 bit gcc: 4.9.2)
           Desktop: MATE 1.8.1 (Gtk 3.14.5-1+deb8u1)
           Distro: antiX-16.1_x64-full Berta Cáceres 16 January 2017
Machine:   Device: desktop Mobo: Gigabyte model: GA-78LMT-USB3 6.0 v: x.x
           BIOS: Award v: F2 date: 11/25/2014
CPU:       Octa core AMD FX-8320 Eight-Core (-MCP-) cache: 16384 KB
           flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm) bmips: 56251
           clock speeds: max: 3500 MHz 1: 1700 MHz 2: 2300 MHz 3: 2300 MHz
           4: 2300 MHz 5: 1700 MHz 6: 1700 MHz 7: 3500 MHz 8: 1700 MHz
Graphics:  Card: Advanced Micro Devices [AMD/ATI] Device 67df bus-ID: 01:00.0
           Display Server: X.Org 1.16.4 driver: vesa
           Resolution: [email protected]
           GLX Renderer: Gallium 0.4 on llvmpipe (LLVM 3.5, 128 bits)
           GLX Version: 3.0 Mesa 10.3.2 Direct Rendering: Yes
Audio:     Card-1 Advanced Micro Devices [AMD/ATI] Device aaf0
           driver: snd_hda_intel bus-ID: 01:00.1
           Card-2 Advanced Micro Devices [AMD/ATI] SBx00 Azalia (Intel HDA)
           driver: snd_hda_intel bus-ID: 00:14.2
           Sound: ALSA v: k4.4.10-antix.1-amd64-smp
Network:   Card: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
           driver: r8169 v: 2.3LK-NAPI port: ce00 bus-ID: 03:00.0
           IF: eth0 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives:    HDD Total Size: 6505.4GB (58.5% used)
           ID-1: /dev/sda model: TOSHIBA_DT01ACA2 size: 2000.4GB
           ID-2: USB /dev/sdb model: 15EADS_External size: 1500.3GB
           ID-3: USB /dev/sdc model: iPod size: 4.1GB
           ID-4: USB /dev/sdd model: My_Book_1148 size: 3000.6GB
Partition: ID-1: / size: 1.8T used: 212G (13%) fs: ext4 dev: /dev/sda3
Sensors:   System Temperatures: cpu: 16.5C mobo: N/A
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 239 Uptime: 10 min Memory: 1311.7/16032.7MB
           Init: SysVinit runlevel: 5 Gcc sys: 4.9.2
           Client: Shell (bash 4.3.301) inxi: 2.3.8


Nest, figuring out the AMD graphic driver

_________________
As Above, So Below
As Below, So Above


Top
 Profile  
 
 Post subject: Re: What specs are you running antiX on?
PostPosted: Thu May 25, 2017 1:23 am 
Offline
User avatar

Joined: Wed May 11, 2016 3:25 pm
Posts: 125
Antix 17 works great right out of the box on this old desktop. :)
Code:
$ inxi -Fx
System:    Host: Dell-XPS-200 Kernel: 4.10.5-antix.1-486-smp i686 (32 bit gcc: 6.3.0)
           Desktop: IceWM 1.3.12+mod+20170325.1 Distro: antiX-17.a3_386-full keerfa 22 April 2017
Machine:   Device: desktop System: Dell product: Dell DXC051
           Mobo: Dell model: 0DD431 BIOS: Dell v: A03 date: 10/28/2005
CPU:       Dual core Intel Pentium D (-MCP-) cache: 1024 KB flags: (lm nx pae sse sse2 sse3) bmips: 11172
           clock speeds: max: 2793 MHz 1: 2793 MHz 2: 2793 MHz
Graphics:  Card: NVIDIA GT216 [GeForce 210] bus-ID: 01:00.0
           Display Server: X.Org 1.19.2 drivers: nouveau (unloaded: modesetting,fbdev,vesa)
           Resolution: [email protected]
           GLX Renderer: Gallium 0.4 on NVA5 GLX Version: 3.0 Mesa 13.0.6 Direct Rendering: Yes
Audio:     Card-1 Intel NM10/ICH7 Family High Definition Audio Controller driver: snd_hda_intel bus-ID: 00:1b.0
           Card-2 NVIDIA GT216 HDMI Audio Controller driver: snd_hda_intel bus-ID: 01:00.1
           Sound: Advanced Linux Sound Architecture v: k4.10.5-antix.1-486-smp
Network:   Card: Intel NM10/ICH7 Family LAN Controller driver: e100 v: 3.5.24-k2-NAPI port: ccc0 bus-ID: 03:08.0
           IF: eth0 state: up speed: 100 Mbps duplex: full mac: 00:12:3f:b1:6a:ab
Drives:    HDD Total Size: 80.0GB (6.9% used)
           ID-1: /dev/sda model: ST380819AS size: 80.0GB
Partition: ID-1: / size: 71G used: 3.3G (5%) fs: ext4 dev: /dev/sda1
           ID-2: swap-1 size: 2.15GB used: 0.00GB (0%) fs: swap dev: /dev/sda2
Sensors:   System Temperatures: cpu: No active sensors found. Have you configured your sensors yet? mobo: N/A gpu: 59.0
Info:      Processes: 136 Uptime: 11:02 Memory: 221.1/3029.3MB Init: SysVinit runlevel: 5 Gcc sys: 6.3.0
           Client: Shell (bash 4.4.121) inxi: 2.3.8
Dell-XPS-200:~

_________________
I'm grumpy because I can be not because I'm old.

The world is what you make of it, if it doesn't fit, you make alterations.

Linux The Smart Choice For Smart People. Windows For Everyone Else.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 160 posts ]  Go to page Previous  1 ... 7, 8, 9, 10, 11


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
suspicion-preferred