It is currently Thu Jun 29, 2017 12:55 pm



Welcome
Welcome to antiX-forum.

You are currently viewing our boards as a guest, which gives you limited access to view most discussions and access our other features. By joining our free community, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content, and access many other special features. Registration is fast, simple, and absolutely free, so please, join our community today!


Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: Hello from new user
PostPosted: Mon May 09, 2016 12:16 am 
Offline

Joined: Sun May 01, 2016 3:29 am
Posts: 3
I have just started out with Antix16 on this old computer project. It is a Jetway 623dmp motherboard with pentium 3 coppermine @ 1Ghz, with 2 Gbyte ram. So far its working pretty good, other than the cpu runs at 100% wile watching dvd's and youtube causes iceweasel to shut off. Smplayer works good.
Phil


Top
 Profile  
 
 Post subject: Re: Hello from new user
PostPosted: Mon May 09, 2016 2:14 am 
Offline

Joined: Mon Apr 20, 2015 9:58 pm
Posts: 470
Location: Sheboygan, WI
Please post
$inxi -Fxz
read out please.


Top
 Profile  
 
 Post subject: Re: Hello from new user
PostPosted: Mon May 09, 2016 3:28 am 
Offline

Joined: Sun May 01, 2016 3:29 am
Posts: 3
Let me see if this works.
Code:
[email protected]:/home/philip# inxi -Fxz
System:    Host: antix1 Kernel: 4.4.8-antix.1-486-smp i686 (32 bit gcc: 4.9.3)
           Desktop: IceWM 1.3.8
           Distro: antiX-16-b2.1_386-full Berta Cáceres 26 April 2016
Machine:   No /sys/class/dmi; using dmidecode: no smbios data available. Old system?
CPU:       Single core Pentium III (Coppermine) (-UP-) cache: 256 KB
           flags: (pae sse) bmips: 1997 speed: 998 MHz (max)
Graphics:  Card: VIA VT8623 [Apollo CLE266] integrated CastleRock graphics
           bus-ID: 01:00.0
           Display Server: X.org 1.16.4 driver: vesa
           tty size: 80x28 Advanced Data: N/A for root
Audio:     Card VIA VT8233/A/8235/8237 AC97 Audio Controller
           driver: snd_via82xx port: e400 bus-ID: 00:11.5
           Sound: Advanced Linux Sound Architecture v: k4.4.8-antix.1-486-smp
Network:   Card: Realtek RTL-8100/8101L/8139 PCI Fast Ethernet Adapter
           driver: 8139too v: 0.9.28 port: d000 bus-ID: 00:0d.0
           IF: eth0 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives:    HDD Total Size: 10.1GB (40.7% used)
           ID-1: /dev/sda model: IC35L010AVER07 size: 10.1GB
Partition: ID-1: / size: 8.2G used: 2.9G (38%) fs: ext4 dev: /dev/sda2
           ID-2: swap-1 size: 1.11GB used: 0.00GB (0%) fs: swap dev: /dev/sda1
Sensors:   System Temperatures: cpu: No active sensors found. Have you configured your sensors yet? mobo: N/A
Info:      Processes: 124 Uptime: 23:53 Memory: 258.2/1985.4MB
           Init: SysVinit runlevel: 5 Gcc sys: 4.9.2
           Client: Shell (bash 4.3.301) inxi: 2.3.0


Top
 Profile  
 
 Post subject: Re: Hello from new user
PostPosted: Mon May 09, 2016 1:05 pm 
Offline
User avatar

Joined: Fri Feb 20, 2009 3:44 am
Posts: 4017
Location: Pecos, Texas
Howdy and Welcome. Just for future reference. There is no need to run inxi as root in terminal unless you wish to include dmicode in your inxi readout.

Here is a example of a dmicode inxi readout. Don't tell me. I already know I procrastinate a bunch this year.
My schedule is full as heck lately.

Code:
[email protected]:~
$ sudo -s
[sudo] password for biker:
Sorry, try again.
[sudo] password for biker:
[email protected]:/home/biker# inxi -zv7
System:    Host: biker Kernel: 4.2.1-antix.2-486-smp i686 (32 bit gcc: 4.9.2)
           Desktop: IceWM 1.3.8 dm: slim
           Distro: antiX-14-a3-RV_386-full Killah P 11 October 2014
Machine:   System: GATEWAY product: W3507 v: 500
           Mobo: Intel model: D102GGC2 v: AAD70214-201
           Bios: Intel v: GC11020M.15A.2010.2006.0817.0956 date: 08/17/2006
CPU:       Single core Intel Celeron D (-UP-) cache: 512 KB
           flags: (lm nx pae sse sse2 sse3) bmips: 6399 speed: 3199 MHz (max)
Memory:    Array-1 capacity: 2 GB devices: 2 EC: None
           Device-1: DIMM2 size: 1 GB speed: 533 MHz type: DDR2 (Synchronous)
           bus width: 64 bits
           manufacturer: 0x7F98000000000000 part: 0x4B4B553335302D454C470000000000000000 serial: 0x9A2F7177
           Device-2: DIMM3 size: 1 GB speed: 533 MHz type: DDR2 (Synchronous)
           bus width: 64 bits
           manufacturer: N/A part: 0x56303144324C463147423138383634383637 serial: N/A
Graphics:  Card: Advanced Micro Devices [AMD/ATI] RC410 [Radeon Xpress 200/1100]
           bus-ID: 01:05.0 chip-ID: 1002:5a61
           Display Server: X.org 1.16.4 drivers: ati,radeon (unloaded: fbdev,vesa)
           tty size: 80x28 Advanced Data: N/A for root
Audio:     Card Advanced Micro Devices [AMD/ATI] IXP SB4x0 High Definition Audio Controller
           driver: snd_hda_intel bus-ID: 00:14.2 chip-ID: 1002:437b
           Sound: Advanced Linux Sound Architecture v: k4.2.1-antix.2-486-smp
Network:   Card-1: Realtek RTL-8100/8101L/8139 PCI Fast Ethernet Adapter
           driver: 8139too v: 0.9.28 port: 1000
           bus-ID: 02:02.0 chip-ID: 10ec:8139
           IF: eth0 state: down mac: <filter>
           Card-2: Realtek RTL8191SU 802.11n WLAN Adapter
           driver: r8712u usb-ID: 001-002 chip-ID: 0bda:8172
           IF: wlan1 state: N/A mac: N/A
           WAN IP: <filter> IF: eth0 ip: N/A ip-v6: N/A
           IF: wlan1 ip: <filter> ip-v6: <filter>
Drives:    HDD Total Size: 444.0GB (18.1% used)
           ID-1: /dev/sda model: ST3120213A size: 120.0GB serial: 9LS1G09D
           ID-2: /dev/sdb model: Maxtor_5A320J0 size: 323.9GB serial: A82F6WDE
           Optical: /dev/sr0 model: HL-DT-ST DVD+-RW GSA-H21N
           rev: 1.00 dev-links: cdrom,cdrw,dvd,dvdrw
           Features: speed: 48x multisession: yes
           audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r state: running
Partition: ID-1: / size: 9.0G used: 8.1G (95%) fs: ext4 dev: /dev/sda1
           label: N/A uuid: 50d6af4b-c241-4639-b075-d59149dc773f
           ID-2: /home size: 31G used: 14G (49%) fs: ext4 dev: /dev/sda3
           label: N/A uuid: bab99903-8063-4e7b-a371-7e129ad3c7a2
           ID-3: /media/data2 size: 297G used: 41G (15%) fs: ext4 dev: /dev/sdb1
           label: /data2 uuid: b3b59257-818b-457d-b44a-9bc6632c050e
           ID-4: /media/data1 size: 69G used: 10G (16%) fs: ext4 dev: /dev/sda4
           label: /data1 uuid: 284c1657-3c0b-484c-ad41-a90908a993fd
           ID-5: swap-1 size: 2.17GB used: 0.00GB (0%) fs: swap dev: /dev/sda2
           label: N/A uuid: a55f5477-b77d-4e07-b34a-d0260ad85959
RAID:      No RAID data: /proc/mdstat missing-is md_mod kernel module loaded?
Unmounted: ID-1: /dev/ram0 size: 0.02G label: N/A uuid: N/A
           ID-2: /dev/ram1 size: 0.02G label: N/A uuid: N/A
           ID-3: /dev/ram2 size: 0.02G label: N/A uuid: N/A
           ID-4: /dev/ram3 size: 0.02G label: N/A uuid: N/A
           ID-5: /dev/ram4 size: 0.02G label: N/A uuid: N/A
           ID-6: /dev/ram5 size: 0.02G label: N/A uuid: N/A
           ID-7: /dev/ram6 size: 0.02G label: N/A uuid: N/A
           ID-8: /dev/ram7 size: 0.02G label: N/A uuid: N/A
           ID-9: /dev/ram8 size: 0.02G label: N/A uuid: N/A
           ID-10: /dev/ram9 size: 0.02G label: N/A uuid: N/A
           ID-11: /dev/ram10 size: 0.02G label: N/A uuid: N/A
           ID-12: /dev/ram11 size: 0.02G label: N/A uuid: N/A
           ID-13: /dev/ram12 size: 0.02G label: N/A uuid: N/A
           ID-14: /dev/ram13 size: 0.02G label: N/A uuid: N/A
           ID-15: /dev/ram14 size: 0.02G label: N/A uuid: N/A
           ID-16: /dev/ram15 size: 0.02G label: N/A uuid: N/A
Sensors:   System Temperatures: cpu: 53.9C mobo: 52.4C
           Fan Speeds (in rpm): cpu: 2286 fan-2: 1046 fan-4: 0
Info:      Processes: 111 Uptime: 54 min Memory: 325.7/1890.1MB
           Init: SysVinit v: 2.88 runlevel: 5 default: 5 Gcc sys: 4.9.2
           Client: Shell (bash 4.3.301 running in sudo) inxi: 2.2.28
[email protected]:/home/biker# exit
exit
[email protected]:~
$


The dmicode is the ram details on this box out of a dumpster.

_________________
Linux Registered User # 475019
Linux at Home courses
How to Search for AntiX solutions to your problems


Top
 Profile  
 
 Post subject: Re: Hello from new user
PostPosted: Mon May 09, 2016 4:01 pm 
Offline

Joined: Mon Apr 20, 2015 9:58 pm
Posts: 470
Location: Sheboygan, WI
I use the add-on You Tube All HTML5

Just in case, to update flash
Code:
# update-flashplugin-nonfree --install


Top
 Profile  
 
 Post subject: Re: Hello from new user
PostPosted: Tue May 10, 2016 2:17 am 
Offline

Joined: Sun May 01, 2016 3:29 am
Posts: 3
Do you see anything wrong there in the readout?


Top
 Profile  
 
 Post subject: Re: Hello from new user
PostPosted: Tue May 10, 2016 6:41 am 
Offline

Joined: Mon Apr 20, 2015 9:58 pm
Posts: 470
Location: Sheboygan, WI
chevyiron420 wrote:
Do you see anything wrong there in the readout?


Code:
Sensors:   System Temperatures: cpu: No active sensors found. Have you configured your sensors yet? mobo: N/A


No, I do not. Just I would not trust the temp reading to be accurate .
The read out gives us a idea of what you are dealing with equipment wise which helps us help you.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
suspicion-preferred